How to solve the production problem of small quantity colored glass bottles

In many customer needs, because glass bottle products need to be protected from light, process coloring, etc., there are requirements for colored glass bottles, and the quantity is not very large, so how to solve these problems?

Many glass bottle manufacturers use spraying, coloring and other processes, and the most effective method is to use the crucible melting process.

In different crucibles, according to the different colors of the required materials, the raw materials are prepared, stirred evenly, put into the crucible, and then heated and melted.

After nearly 20 hours, wrap the material liquid with a seasoning stick, cut the material manually according to the size of the material used in the glass bottle, put it into the semi-automatic bottle making machine, and carry out bottle production. After the second annealing, the packaging can be inspected. Packed into storage.

This process is to directly mix the color into the raw material according to the requirements, and the glass bottles produced are also colorful, which is spraying and coloring.

Craftsmanship cannot be replaced. The difference is that the color of each glass bottle product must be the same color, and glass bottles cannot have two colors at the same time.

In the production of many glass handicrafts, different colored material liquids taken from different crucibles are put together for heating and melting to make various decorations.

And many glass bottle products require several colors at the same time, especially some high-end glass essential oil dropper bottles, cosmetic bottles, perfume glass bottles, etc. also need filter colors to set off the temperament of the product.

And this requirement is none other than the spraying process.