The Glass Bottle Manufacturer Tells You What Is The Spraying Process Of The Glass Bottle?

The glass bottle manufacturer tells you, what is the spraying process of the glass bottle? Let's analyze it together.

The glass bottle manufacturer tells you that the spraying production line of glass bottles is generally composed of sub-chambers, hanging chains and ovens. Glass bottles and the front road water treatment, glass bottles need special attention to the problem of sewage discharge. The quality of glass bottle spraying is related to water treatment, workpiece surface cleaning, ring conductivity, air volume, amount of powder spraying, and the level of operators. It is recommended that you try the following: Preprocessing Sections.

The glass bottle spray pretreatment section includes pre-extraction, main stripping, surface conditioning, etc. In the case of the north, the temperature of the main stripping part will not be too low and needs to be kept warm. Otherwise, the processing effect is not good.

The glass bottle manufacturer tells you, what is the preheating section of the glass bottle?

It usually takes about 8 to 10 minutes to enter the preheating zone after pretreatment. When the glass bottle reaches the fan room, it will give a little residual heat to the sprayed workpiece to increase the adhesion of the fan group. Glass bottle manufacturers

The glass bottle manufacturer tells you, what is the soot blowing purification part of the glass bottle? Let's analyze it together.

If the process requirements of the sprayed workpiece are relatively high, this section is essential. Otherwise, if the workpiece absorbs a lot of dust, a large number of particles will appear on the surface of the processed workpiece, resulting in a decrease in quality.

drying section

This section is the temperature and baking time, the powder is generally 180 ~ 200 degrees. Especially depending on the material of the workpiece. And the drying oven cannot be too far from the powder bomb chamber. Generally 6 meters is better.

Section

The important thing in this section is the technical issues of the branch. If you want to create excellent quality, it is still very cost-effective to spend money on skilled masters. Glass bottle manufacturers

The glass bottle manufacturer tells you, what is the packaging industry of glass bottles? Let's analyze it together.

The main features of glass packaging containers are non-toxic and odorless. Transparent, beautiful, good barrier, airtight, rich in raw materials, low price, and can be rotated many times. In addition, it has the advantages of heat resistance, pressure resistance, cleaning, high temperature sterilization and low temperature storage. It is precisely because of its many advantages that it has become a packaging material for essential oils, cosmetics and skin care products.